Umumtexnika fanlari kafedrasi mudiri
Butayev Ruslan Buriboyevich
Reception time: haftaning Seshanba va juma kunlari soat 14:00 dan 16:00 gacha.
Telefon: (99) 588-13-83
History of the Department of GENERAL TECHNICAL SCIENCES
In 1977, the Faculty of Technical Sciences and the Department of "General Engineering and General Education Sciences" were established under the Tashkent Polytechnic Institute, and the Candidate of Technical Sciences, Associate Professor Mahkam Soatov was appointed as the head of the department.
In 1978, after the establishment of the Jizzakh branch of the Tashkent Polytechnic Institute, the Department of "Technical Mechanics" was separated from the Department of "General Engineering Sciences", and the Candidate of Technical Sciences, Associate Professor Meli Hazratkulov was appointed as the head of the department.
In 1992, in connection with the establishment of the Jizzakh Polytechnic Institute, the Department of "Technical Mechanics" was transformed into the Department of "Theoretical and Applied Mechanics", and the Candidate of Technical Sciences, Associate Professor Khalmurat Khaydarovich Igamberdiev was appointed as the head of the department.
Due to the increase in the number of students at the institute and the subjects taught at the department, in different years the department was divided into the following departments: "Light Industry Technologies and Mechanics" (Department Head, Ph.D., Assoc. Prof. Kh.Kh.Igamberdiev), "Mechanics" (Department Head, Ph.D.-M.Phil., Assoc. Prof. A.Sh.Berdiyorov), "General Engineering Sciences" (Department Head, Ph.D., Assoc. Prof. M.H.Rakhmatullayev), "General Engineering Sciences and Agricultural Mechanization" (Department Head, Ph.D., Assoc. Prof. G'.G'.Egamnazarov), "General Engineering Sciences, Metrology and Standardization" (Department Head, Ph.D., Assoc. Prof. Kh.Kh.Igamberdiev), "General Engineering Sciences" (Department Head, Ph.D., Assoc. Prof. f.-m.f.s., doc. A.Kh.Zokirov), "General Engineering Sciences" department (department head of i.s., doc. M.A.Aynakulov), "General Engineering Sciences" department (department head of p.f.p.d., doc. J.R.Turmatov). Currently, the department is operated under the name "General Engineering Sciences" and is headed by f-m.f.p.d.(PhD) R.B.Butayev.
Currently, 18 professors and teachers work at the department. Including 2 doctors of science, professors, 7 candidates of science, associate professors, 2 senior teachers, 7 assistants. The department's team is tasked with conducting educational, methodological, and research work in the preparation of qualified personnel.
The department teaches such subjects as "Theoretical Mechanics", "Resistance of Materials", "Technical Mechanics", "Practical Mechanics", "Mechanics", "Construction Mechanics", "Materials Science and KMT", "Theory of Machines and Mechanisms", "Machine Details". Educational and methodological materials have been prepared for all subjects in accordance with the educational process.
Results of research work carried out by the department within the framework of State scientific and technical programs
In the department of "General Technical Sciences" in the 2020-2021, 2021-2022, 2022-2023 academic years, scientific research work is being carried out in the following areas based on applied technical programs:
It is planned to participate in the Dalat grant tenders for the set of scientific works on the topic "Creation of new types of high-resource working bodies of tillage cultivators and substantiation of their parameters".
2 utility models on this topic were submitted to the Intellectual Property Agency under the Ministry of Justice of the Republic of Uzbekistan and a positive decision was made.
Name of utility model: "Rotary working body of tillage cultivator" FAP 2022 0017.
Authors: Nuriev Karim Katibovich, Nuriev Mansur Karim o'g'li, Kuvondikov Yaqub Tursunbaevich, Qobilov Bekzod O'ktam o'g'li.
Name of utility model: "Soil tillage cultivator "FAP 2022 0018" entitled "Collective Working Body".
Authors: Nuriev Karim Katibovich, Nuriev Mansur Karim o'gli, Turmatov Jaloliddin Rakhmatullaevich, Kuvondikov Yaqub Tursunbaevich, Qobilov Bekzod Oktam o'gli.
Integration of science with education and production
The department has established strong ties with a number of higher and research institutions of our Republic, including: the Research Institute of Agricultural Mechanization, the National University of Uzbekistan, Tashkent State Technical University, Tashkent Institute of Architecture and Construction, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent Institute of Textile and Light Industry. Research and scientific-methodological work is being carried out in collaboration with the above-mentioned universities and institutes.
Work on innovative ideas and developments
To participate in the competition for the selection and financing of priority innovative, research, experimental and design and "startup" projects on a self-financing basis, the Department of "General Engineering Sciences" presented the following projects:
- Development of a device for separating soybean seeds from pods and substantiation of its parameters;
- Sunlight dryer;
- Method of watering plants in areas without water;
- Creation of a new type of arrow-shaped paw for the KXU-4X cultivator;
- Creation of a new type of arrow-shaped paw for the CHKU-4A cultivator.
Results achieved through international cooperation and scientific contacts abroad
In order to introduce advanced foreign experience into the educational process, improve the quality and effectiveness of education and research, international cooperation relations have been established with leading higher educational institutions in developed countries and scientific research institutes in the system of the Academy of Sciences:
• Fardaev A.R., Associate Professor of the Department of "Mechanics and Design" of the Naberezhnye Chelny Institute of the Kazan Federal University of the Russian Federation, Head of the Department, Associate Professor Turmatov Zh.R., and Associate Professor O. Koychiyev of the Department, signed agreements on establishing cooperation relations in scientific and educational fields.
• In order to improve the quality of education in the department and strengthen international cooperation, the Department of "General Engineering Sciences" of the Jizzakh Polytechnic Institute and the Department of "Mechanics and Design" of the Naberezhnye Chelny Institute of Kazan Federal University, Associate Professor Fardaaev Albert Rifovich, will conduct online classes via the ZOOM platform for 12 hours in the subject "Mechanics" for students of the 2nd stage M-2-20 group, and 12 hours in the subject "Theoretical Mechanics" for students of the M-1-21 group.
Implementation of a perspective plan for the training of scientific and pedagogical personnel at the department
Pardaev O.R. - Doctor of Technical Sciences, Professor Nuriev K.K. continues his scientific research work on the topic "Scientific and technical solutions for separating agricultural crops from ears and pods in small areas" to obtain the scientific degree of Doctor of Science (Dsc).
Kuvondikov Yo.T. - Doctor of Technical Sciences, Professor Nuriev K.K. continues his scientific research work as an independent researcher on the topic "Study of the dynamics of the cultivator's paw and creation of a high-resource design" under the supervision of.
Akhmedov A.T. - Doctor of Technical Sciences, Professor Nuriev K.K. began his scientific research work as an independent researcher on the topic "Increasing the efficiency of the use of cultivators by preserving their design geometry" under the supervision of.
Norbekov N.N. - Assoc. Prof. Turmatov J.R. under the scientific supervision of the specialty 13.00.02 - Theory and Methodology of Education and Training (Technical Sciences) is conducting scientific research on the topic "Methodology of developing innovative engineering activities of students based on a modular-competent approach (on the example of the subject of Mechanics)" as an independent researcher.
Parmanov N.N. - Doctor of Technical Sciences, Professor Nuriev K.K. is conducting scientific research on the topic "Increasing the service life of the cultivator blade" as an independent researcher.
Qabilov B.U. - Doctor of Technical Sciences, Professor Nuriev K.K. is conducting scientific research on the topic "Substantiation of the parameters of the working body of the cultivator with an increased resource structure" under the supervision of the scientific research Turdaliev Z.S. - Doctor of Technical Sciences, Professor Khudaynazarov X.Kh. is conducting scientific research as an independent researcher on the topic "Some aspects of the physical and mechanical properties of vibrations of multilayer (composite) plates."